Dunsley

Permalink Gallery

Dunsley Highlander 3 Enviro-burn

Dunsley Highlander 3 Enviro-burn

, ,

The Highlander 3 Enviroburn Stove
Woodburning Multifuel stove
Clean and Clear
Enviro-burn combustion and airwash supply mean a clear view of the flames.
HETAS approved
The Highlander 3 Enviro-burn is a free standing Woodburning Multifuel stove approved to burn wood logs in smoke control areas. The appliance is constructed from 4 and 10mm steel and cast iron. It incorporates both rear and top flue outlet. You can have a choice of black, brass or polished steel handles. A canopy can be supplied on request.

The Highlander 3 has been designed with one door, to open for re-fuelling and ash removal, therefor no safety precautions are necessary to prevent overfiring of fuel when removing ash from below the grate. The Highlander 3 will take logs up to 250mm (10″) long.

Permalink Gallery

Dunsley Highlander 5 Enviro-burn

Dunsley Highlander 5 Enviro-burn

, ,

The Dunsley Highlander Enviro-burn 5 clean combustion and airwash air supply means a clear view of the flames.
HETAS APPROVED
The Highlander Enviro-burn 5 is a free standing stove approved to burn wood logs in smoke control areas. The appliance is constructed from 4 and 10mm steel and cast iron. It incorporates both rear and a top flue outlet. The firebox is lined at the sides back and top by “800Kq/m3 density ceramic fibre refractory boards” and comes with a black metallic finish. You have a choice of black, brass or polished steel handles. A canopy can be supplied on request.

The Dunsley Highlander Enviro-burn 5 stove has only one door to open for re-fuelling and removing ashes. This also means that the safety precaution to prevent overfiring is automatically provided for.
HOW IT WORKS
The Highlander Enviro-burn 5 has two combustion controls. The most ideal setting will quickly be found moving the slide slowly to find the most suitable position. Using the correct rate of burning efficiencies of up to 78.9% burning wood logs can be achieved.

If you intend to fit the canopy onto the stove add 135mm to the height.

NB: Flue pipe is not provided by the manufacturer with most stoves. Exceptions to this are flueless gas stoves and electric stoves which do not require flue pipe. The inclusion of flue pipe with balanced flue gas stoves varies and should be confirmed dependant on the model ordered. You can order flue pipe from the ‘Flue & Chimney’ menu option at the top of the page.

Permalink Gallery

Dunsley Highlander 8 Central Heating Stove

Dunsley Highlander 8 Central Heating Stove

, ,

The Highlander 8 CH Stove
Woodburning Multifuel Stove
The Highlander 8 Woodburning Multifuel stove is fitted with a fully integral boiler for central heating, capable of running up to five average sized radiators, plus domestic hot water as well as providing heat into the room. The boiler output is controlled by a Thermostat control knob on the stove, and manufactured to the same high standard that Dunsley have maintained for the past 60 years.
Points of note

* The grate mechanism can be adjusted for burning wood or other solid fuels.
* The Highlander 8 is available with black, brass or polished steel knobs and is finished in black paint.
* The Highlander 8 CH is available only with a top flue connection.
*Large capacity ash pan.

Permalink Gallery

Dunsley Highlander 8 Double Fronted Multifuel / Woodburning Stove

Dunsley Highlander 8 Double Fronted Multifuel / Woodburning Stove

, ,

 
The Highlander 8 Double fronted stove is ideal for homes and pubs, or hotels that have, or wish to create, a central chimney room setting as a focal point. This double fronted model has front and back doors and is now available with a choice of double doors or the new Solo single door option
A wide door opening and large fire bed capacity, enables you to load the fire box with good sized logs of up to 460mm  or 18″ length.

The Highlander 8 Stove has an air wash system designed to keep the glass clean by diverting a warm flow of air directly over the surface  of the glass. Each door has its own primary air controls. These control the amount of fuel being burnt and can also be closed down  for overnight burning of fossil fuels.

With a heat output of 7 – 8 kW maximum the Highlander 8 will heat a medium to large room.

The grate mechanism can be adjusted for burning wood or other solid fuels including: peat, coal and coal briquettes. Using the correct rate of burning efficiencies of up to 78% on wood logs and 75% on anthracite can be obtained

The Highlander 8 Double Fronted Stove is available with black, brass or polished steel knob, and is finished in black metallic paint.

 The Dunsley Highlander 8 Double Fronted Stove is available with a top flue connection only

Permalink Gallery

Dunsley Highlander 10 Log Store

Dunsley Highlander 10 Log Store

, ,

The Dunsley Highlander 10 CH Stove
Woodburning Multifuel Stove
The Highlander 10 Woodburning Multifuel stove is a wide version of the popular highlander 8 stove, with the same burning control system but nearly 100mm wider than the 8 and with a fuel box area to take logs up to 550mm long, this makes the highlander 10 more suitable for larger rooms. The Thermostat control knob controls the amount of fuel being burnt and can also be closed down for overnight burning of fossil fuels.
Points of note
* With a heat output of 14.4 KW maximum the Highlander 10 will easily heat larger rooms.
* The grate mechanism can be adjusted for burning wood or other solid fuels.
* The Highlander 8 is available with black, brass or polished steel knobs and is finished in black paint.

Permalink Gallery

Dunsley Highlander solo 16 Central Heating Boiler

Dunsley Highlander solo 16 Central Heating Boiler

, ,

The Dunsley Highlander 16 Solo Multifuel Boiler Stove is fitted with a fully integral boiler for central heating and domestic hot water as well as providing heat into the room.

The Dunsley Highlander 16 Solo Multifuel Boiler Stove also has a built in thermostat that automatically monitors the central heating temperature and controls the incoming air to regulate how the fire burns to meet the central heating requirements.

The stove can be fitted with an external air intake pipe which is fitted to the air box underneath the stove, this allows combustion air to be taken from outside the building.

At present, building regulations state you must have a permanent open air vent to the room where the stove is sited. Air vents can cause drafts . With the addition of an Outside air kit, drafts can be eliminated because over 80%  of the air required for the stove is taken through the kit.

It will reduce the number of air changes within the room, so significantly reducing the heat loss and the need for air being pulled through a regulation air vent.

The Dunsley Highlander 16 Solo Multifuel Boiler Stove has multifuel grate bars as standard and is fitted with black handles as standard, with solid brass or polished steel handles available on request.

Please note – The Highlander central heating models are only available with top flue connection and have straight legs. A canopy can be supplied on request.

Built to the highest standards, these stoves are designed for superb cleaner burning and clean combustion including an air wash air supply giving a clear view of the dancing flames.

The stove is also HETAS approved.

Stove Features:

Output, burning ancit
Output to water, 12.4kw (42,308 BTUs)
Output to room, 4.5kw (15,354 BTUs)

Output burning logs
Output to water, […]

Permalink Gallery

Highlander 8 Central Heating Boiler

Highlander 8 Central Heating Boiler

, ,

The Highlander 8 Woodburning Multifuel stove is fitted with a fully integral boiler for central heating, capable of running up to five average sized radiators, plus domestic hot water as well as providing heat into the room. The boiler output is controlled by a Thermostat control knob on the stove, and manufactured to the same high standard that Dunsley have maintained for the past 60 years.

Points of note

The grate mechanism can be adjusted for burning wood or other solid fuels.
The Highlander 8 is available with black, brass or polished steel knobs and is finished in black paint.
The Highlander 8 CH is available only with a top flue connection.
Large capacity ash pan.
Output, burning ancit
Output to water, 7.7kw (26,272 BTUs)
Output to room, 3.8kw (12,965 BTUs)

Output burning logs
Output to water, 5.8kw (19,789 BTUs)
Output to room, 3.9kw (13,306 BTUs)

Height, 645mm
Width, 605mm
Depth, 385mm
Flue size, 6”
Fuel type, multifuel

Permalink Gallery

Dunsley Yorkshire Central Heating Boiler

Dunsley Yorkshire Central Heating Boiler

, ,

Developed through 30 years of research The Yorkshire Stove Woodburning Multifuel Stove is the first of a whole new breed of heat source. At last, we have created fire without smoke.

Emissions from the Yorkshire Stove are so low that it very easily complies with the clean air act (see graph on the technical spec page). Independent laboratory tests show efficiencies of over 70% on a whole range of fuels including wood.

The Yorkshire Stove can be the solution for room heating only or an automatic central heating model can be ordered either as a multifuel model or as a woodburning model. The woodburning model is less expensive but can only burn wood.

The Yorkshire built in thermostat automatically monitors central heating temperature and controls the incoming air to regulate how fiercely the fire burns to meet central heating requirements.

The Yorkshire automatic central heating boiler works on its own without any electrical connections, however electrics are required to operate the circulating pump, room stats etc which are fitted into the heating system to turn the fire up in the morning and down at night. So throw on the fuel, remove the ash as required and the Yorkshire automatic pretty much takes care of itself.

Output, burning ancit
Output to water, 5.7kw
Output to room, 6.4kw

Output burning Beech logs
Output to water, 7.9kw
Output to room, 6.6kw

Height, 715mm
Width, 595mm
Depth, 450mm
Flue size, 6”
Fuel type, multifuel

Permalink Gallery

Dunsley Highlander 10 Central Heating Boiler

Dunsley Highlander 10 Central Heating Boiler

, ,

The Dunsley Highlander 10 Log Store Multifuel / Wood Burning Stove integrates a log store into the design of the popular Highlander 10. With an output of up to 10kW, the Dunsley Highlander 10 stove is ideal for larger rooms, and the wide door opening allows it to take logs up to 550mm long.

The log store built into the Dunsley Highlander 10 woodburner makes it easier to reach all the controls and remove the ash, making it a favourite with the older and infirm. The raised position also makes the Dunsley Highlander 10 log store stove a popular choice for creating a feature in homes, pubs and hotels.

Features

Heat output up to 10kW
Steel stove body construction with cast iron stove doors
Fitted with cast iron multifuel riddling grate as standard
Very efficient air wash
Automatic door safety device
Can be used in a smokeless area when burning authorized smokeless fuels

Options

Flat top or with canopy (adds 135mm to height of stove)
Black, chrome or brass handles
Add in stainless steel boiler (13700Btu)

Output, burning ancit
Output to water, 10.5kw (35,826 BTUs)
Output to room, 3.9kw (13,306 BTUs)

Output burning logs
Output to water, 8.2kw (27,978 BTUs)
Output to room, 5.2kw (17,742 BTUs)

Height, 630mm
Width, 690mm
Depth, 385mm
Flue size, 6”
Fuel type, multifuel