Call for Free Advice: 01670 505 766|info@vertechs.co.uk

Boiler Stoves

Permalink Gallery

Evolution 26 Boiler Stove

Evolution 26 Boiler Stove

,

The Evolution range of cast iron wood burning stoves incorporate contemporary design and modern stove technology with traditional cast iron construction.

The Evolution 26 boiler stove features the Broseley Safety Cold Water System that allows you to connect this woodburning stove directly to an unvented heating system allowing connection to existing boilers and renewable heat source easier without the need for extra feed and expansion vessels in the loft.

Please note the Evolution 26 is currently not eligible to receive domestic or commercial RHI payments (including legacy installations). The schemes current policy is to only include biomass products which fall into the Log Gasification or Pellet categories. The scheme may consider other heating technologies in the future.

Features »

Wood burning only
SCWS Boiler technology (enables connection to sealed heating system)
Airwash
Single air control
Cast iron construction with steel burn box
Modern design
Top outlet only (6″ diameter)
Large viewing window
Grate and ashpan
Vermiculite firebricks
Smoke Exempt for use in smoke control areas
5 Year Warranty
Dimensions W800m x H700mm x D692mm

FUEL TYPE
EFFICIENCY %
WEIGHT
 HEAT OUTPUT TO ROOM
HEAT OUTPUT TO WATER

WOOD ONLY
78
320 Kg
10kW / 34,140 BTU/HR
16kW / 54,524 BTU/HR

Permalink Gallery

Dunsley Highlander 3 Enviro-burn

Dunsley Highlander 3 Enviro-burn

, ,

The Highlander 3 Enviroburn Stove
Woodburning Multifuel stove
Clean and Clear
Enviro-burn combustion and airwash supply mean a clear view of the flames.
HETAS approved
The Highlander 3 Enviro-burn is a free standing Woodburning Multifuel stove approved to burn wood logs in smoke control areas. The appliance is constructed from 4 and 10mm steel and cast iron. It incorporates both rear and top flue outlet. You can have a choice of black, brass or polished steel handles. A canopy can be supplied on request.

The Highlander 3 has been designed with one door, to open for re-fuelling and ash removal, therefor no safety precautions are necessary to prevent overfiring of fuel when removing ash from below the grate. The Highlander 3 will take logs up to 250mm (10″) long.

Permalink Gallery

Dunsley Highlander 5 Enviro-burn

Dunsley Highlander 5 Enviro-burn

, ,

The Dunsley Highlander Enviro-burn 5 clean combustion and airwash air supply means a clear view of the flames.
HETAS APPROVED
The Highlander Enviro-burn 5 is a free standing stove approved to burn wood logs in smoke control areas. The appliance is constructed from 4 and 10mm steel and cast iron. It incorporates both rear and a top flue outlet. The firebox is lined at the sides back and top by “800Kq/m3 density ceramic fibre refractory boards” and comes with a black metallic finish. You have a choice of black, brass or polished steel handles. A canopy can be supplied on request.

The Dunsley Highlander Enviro-burn 5 stove has only one door to open for re-fuelling and removing ashes. This also means that the safety precaution to prevent overfiring is automatically provided for.
HOW IT WORKS
The Highlander Enviro-burn 5 has two combustion controls. The most ideal setting will quickly be found moving the slide slowly to find the most suitable position. Using the correct rate of burning efficiencies of up to 78.9% burning wood logs can be achieved.

If you intend to fit the canopy onto the stove add 135mm to the height.

NB: Flue pipe is not provided by the manufacturer with most stoves. Exceptions to this are flueless gas stoves and electric stoves which do not require flue pipe. The inclusion of flue pipe with balanced flue gas stoves varies and should be confirmed dependant on the model ordered. You can order flue pipe from the ‘Flue & Chimney’ menu option at the top of the page.

Permalink Gallery

Dunsley Highlander 8 Central Heating Stove

Dunsley Highlander 8 Central Heating Stove

, ,

The Highlander 8 CH Stove
Woodburning Multifuel Stove
The Highlander 8 Woodburning Multifuel stove is fitted with a fully integral boiler for central heating, capable of running up to five average sized radiators, plus domestic hot water as well as providing heat into the room. The boiler output is controlled by a Thermostat control knob on the stove, and manufactured to the same high standard that Dunsley have maintained for the past 60 years.
Points of note

* The grate mechanism can be adjusted for burning wood or other solid fuels.
* The Highlander 8 is available with black, brass or polished steel knobs and is finished in black paint.
* The Highlander 8 CH is available only with a top flue connection.
*Large capacity ash pan.

Permalink Gallery

Dunsley Highlander 8 Double Fronted Multifuel / Woodburning Stove

Dunsley Highlander 8 Double Fronted Multifuel / Woodburning Stove

, ,

 
The Highlander 8 Double fronted stove is ideal for homes and pubs, or hotels that have, or wish to create, a central chimney room setting as a focal point. This double fronted model has front and back doors and is now available with a choice of double doors or the new Solo single door option
A wide door opening and large fire bed capacity, enables you to load the fire box with good sized logs of up to 460mm  or 18″ length.

The Highlander 8 Stove has an air wash system designed to keep the glass clean by diverting a warm flow of air directly over the surface  of the glass. Each door has its own primary air controls. These control the amount of fuel being burnt and can also be closed down  for overnight burning of fossil fuels.

With a heat output of 7 – 8 kW maximum the Highlander 8 will heat a medium to large room.

The grate mechanism can be adjusted for burning wood or other solid fuels including: peat, coal and coal briquettes. Using the correct rate of burning efficiencies of up to 78% on wood logs and 75% on anthracite can be obtained

The Highlander 8 Double Fronted Stove is available with black, brass or polished steel knob, and is finished in black metallic paint.

 The Dunsley Highlander 8 Double Fronted Stove is available with a top flue connection only

Permalink Gallery

Dunsley Highlander 10 Log Store

Dunsley Highlander 10 Log Store

, ,

The Dunsley Highlander 10 CH Stove
Woodburning Multifuel Stove
The Highlander 10 Woodburning Multifuel stove is a wide version of the popular highlander 8 stove, with the same burning control system but nearly 100mm wider than the 8 and with a fuel box area to take logs up to 550mm long, this makes the highlander 10 more suitable for larger rooms. The Thermostat control knob controls the amount of fuel being burnt and can also be closed down for overnight burning of fossil fuels.
Points of note
* With a heat output of 14.4 KW maximum the Highlander 10 will easily heat larger rooms.
* The grate mechanism can be adjusted for burning wood or other solid fuels.
* The Highlander 8 is available with black, brass or polished steel knobs and is finished in black paint.

Permalink Gallery

Dunsley Highlander 10 Double Door straight leg

Dunsley Highlander 10 Double Door straight leg

The new Dunsley Highlander 10 boiler stove is fitted with a fully integral boiler for central heating and domestic hot water as well as providing heat into the room.

The Dunsley Highlander 10 central heating stove has a built in thermostat which automatically monitors the central heating temperature and controls the incoming air to regulate how the fire burns to meet the central heating requirements.

The Dunsley Highlander 10 central heating boiler stove can be supplied with an extenal air intake pipe which is fitted to the air box underneath the stove, this allows combustion air to be taken from outside the building. If this method is used no extra air vents into the room are required. The Dunsley Highlander 10 grate bars have a small amount of chrome mixed with the cast iron which give them extra strength and durability for the depth of the stove.

The central heating model of the Dunsley Highlander 10 is only available with a top flue connection and has straight legs as shown in the picture.

The Dunsley Highlander 10 boiler stove is available with black, brass or polished steel knobs and is finished in black metallic paint.

Features

The output of the stove is split as follows (Maximum output based on one hour refueling):

Room = 5.5kW
Boiler = 14.5kW