Product Description

The Dunsley Highlander 16 Solo Multifuel Boiler Stove is fitted with a fully integral boiler for central heating and domestic hot water as well as providing heat into the room.

The Dunsley Highlander 16 Solo Multifuel Boiler Stove also has a built in thermostat that automatically monitors the central heating temperature and controls the incoming air to regulate how the fire burns to meet the central heating requirements.

The stove can be fitted with an external air intake pipe which is fitted to the air box underneath the stove, this allows combustion air to be taken from outside the building.

At present, building regulations state you must have a permanent open air vent to the room where the stove is sited. Air vents can cause drafts . With the addition of an Outside air kit, drafts can be eliminated because over 80%  of the air required for the stove is taken through the kit.

It will reduce the number of air changes within the room, so significantly reducing the heat loss and the need for air being pulled through a regulation air vent.

The Dunsley Highlander 16 Solo Multifuel Boiler Stove has multifuel grate bars as standard and is fitted with black handles as standard, with solid brass or polished steel handles available on request.

Please note – The Highlander central heating models are only available with top flue connection and have straight legs. A canopy can be supplied on request.

Built to the highest standards, these stoves are designed for superb cleaner burning and clean combustion including an air wash air supply giving a clear view of the dancing flames.

The stove is also HETAS approved.

Stove Features:

  • Output, burning ancit
  • Output to water, 12.4kw (42,308 BTUs)
  • Output to room, 4.5kw (15,354 BTUs)
  • Output burning logs
  • Output to water, 8.5kw (29,002 BTUs)
  • Output to room, 7.1kw (24,225 BTUs)
  • Height, 765mm
  • Width, 690mm
  • Depth, 485mm
  • Flue size, 6”
  • Fuel type, multifuel